MLAT not sync'ing after migration

Дата публикации: 19-09-2026 11:59:26

This is for Site 268842 – CPE5 – Highbanks
I run my station on intel laptops. I had no upgrade path from DragonOS Jammy to DragonOS Resolute so I installed Resolute on another laptop and then manually moved everything over using scp. I run an Airspy Mini SDR so my software stack is
airspy_adsb → dump1090-fa → piaware 11.0
→ fr24feed
Did this change yesterday around 2:00 pm local time. Data is making it through to flightaware and flightradar24 but it is not participating in MLAT. It’s now roughly 8:00 am the next day.
All the fa-mlat-client connections seem good.
Prior to the migration the station was sync’ing with a little over 300 nearby stations. I think I’ve checked everything at my end. Could the change in local IP be an issue? Any other thoughts?
Regards,
Jim
30 posts - 5 participants
Read full topic

Схожие новости

#	Наименование новости	Тональность	Информативность	Дата публикации
1	Anyone seeing any issues this afternoon?	0	10.76	26-09-2026
2	Bug in skyaware 11?	0	8.8	13-09-2026
3	flight registrations	0	20.23	28-09-2026
4	A 300 NM limit on FlightFeeder?	0	6.27	01-10-2026
5	Turning an obstacle into an advantage: Why is my northern coverage so good with an indoor antenna facing south?	0	6.62	15-09-2026
6	Custom VDL2 Web Console with Live & Archive Search for SHIRAKAMI Station	0	13.37	20-09-2026
7	Piaware are qrsspig	0	14.46	15-09-2026
8	FlightAware Feeder/USB stick	0	7.07	30-09-2026
9	Pi 5 configuration?	0	16.57	23-09-2026
10	Please remove	0	19.2	15-09-2026

Классификация: . Схожих патентов: 0. Схожих новостей: 10. Тональность: 0. Информативность: 12.41. Источник: discussions.flightaware.com.